Ambient Temperature · AutoScrew.LR Optical Frame Adjuster
Piezoelectric · Linear Motion — AutoScrew.LR
Piezoelectric motion@RT solutions — “AutoScrew Series“ Optical frame adjuster
Piezo-Linear Stage with compact shape and no compromise on power
performance; while guaranteeing a premium price space.
Features
- Holding force 100 N, feeding force 20 N.
- Earliest pace 20 nm
- Max. travel 6 mm
- Self-locking at stop, no heat generation
- Threads compatible with standard frame threads
- Controller compatible with MultiFieldsⓇ Motion Controller - Newton Series
Specifications
Optional Versions ⇨ | Default | .HV |
.NM version, non-magnetic; .HV version, high vacuum; | ||
| 1 Bottom size * height | 65 x 65mm x 12mm | |
| 2 Main Material | Stainless Steel | Stainless Steel |
| 3 Cables * Connectors | Standard shielded cable D-Sub 9Connector | Kapton enameled Wire, PEEK-2mm Pin |
Motion parameters-space recommended mounting form I. (The following properties are measured in the recommended installation form) | ||
| 4 Travel | 6mm | |
| 5 MAX. Velocity | 0.5mm/min, MAX. 2mm/s | |
| 6 MAX. Step | Typical 10nm, MAX. 50nm | |
| 7 Drive Frequency | MAX. 2kHz, Typical 350Hz | |
| 8 Active Thrust | 20N | |
| 9 Holding Force | 100N | |
| 10 MAX. Lateral Force | 1N | |
Motion parameters - space recommended installation form II. (The following properties are measured in the recommended installation form) | ||
| 11 Maximum Vertical Load | 2N | |
| 12 Holding Force | 5N | |
| Other | ||
| 13 Operating temperature | 10 - 40°C | |
Zolix 홈페이지
