E80.B6S-K Piezo Control Module
E80.B6S-K Piezo Control Module has 6-channel outputs that contain 2 constant voltage output. It is designed for driving piezo steering mirrors, and can drive CoreMorrow P33.T2S piezo steering platform to operate at ±0.1mrad@100Hz very stably.
Features
- 6 outputs, including 2 constant voltage outputs
- Output voltage 0~100V
- Bandwidth to 10kHz
- For driving piezo steering platforms, etc.
- Closed-loop servo control
Specifications
| Type | E80.B6S-K |
| Function | Board-type controller |
| Channels | 6, including 2 voltage constant output |
| Nominal analog input(V) | 0~10 |
| Nominal output voltage(V) | 0~100 |
| Input power(W) | 36 |
| Peak current(A) | 0.9/channel |
| Ave. current(mA) | 48/channel |
| Input impedance(kΩ) | 100 |
| Bandwidth(Hz) | 10k/channel |
| Ripple, RMS(mV) | 10/channel(2.2μF) |
| PZT connector | J30J-15(female) |
| Control input connector | J30J-15(female) |
| Sensor type | SGS |
| Sensor output voltage(V) | 0~10(±10 for constant voltage version) |
| Servo | P.I |
| Ripple(mV) | 20 |
| Operating temperature(°C) | -40~55 |
| Overcurrent protection | 有 |
| Static power dissipation(W) | 11 |
| Cooling | Cooling fin |
| Size L×W×H(mm) | 150×150×40, two layers |
| Mass(g) | 460 |
| Power supply | 12V/3A |
| Power supply port | Inter-board connector |
| Control way | Analog signal control |
CoreMorrow 홈페이지
