E80.C2K-H Multi-channel Piezo Controller
The E80.C2K-H Multi-channel Piezo Controller is specially customized according to customer requirements, and it's mainly used for driving piezo actuator.
The power amplifier module has two output channels which can output 0~200V voltage, and controlled by analog or digital signal.
The customized modules have extra two DAC outputs and eight ADC gatherings, their voltage ranges all are 0~10V, and resolution is better than 0.1mV.
There is a extra ±8V power supply output on the front panel.
Features
- 2-channel output
- Output voltage: 0~200V
- Customizable
- Analog or Software control
Specifications
| Type | E80.C2K-H |
| Channels | 2 |
| Power supply | 24VDC/1A(20V~30V) |
| Static power(W) | 12 |
| Processor | 32bit 480MHz |
| D/A converter | 18bit |
| A/D converter | 18bit |
| Communication Interface | RS-232，RS-422 |
| Nominal analog input(V) | 0~10 |
| Nominal output voltage(V) | 0~200 |
| Peak current(mA) | 200 |
| Ave. current(mA) | 60 |
| Ampliffer bandwidth(kHz) | 10 |
| Ripple(mVpp) | 10(@2.2μF) |
| Rated output power(W) | 12 |
| Operating temperature range(°C) | 0~50 |
| Output short-circuit current(mA) | 60 |
| PZT output connector | ERA.00.250.CTL |
| ±8V output Interface | EPL.0S.303.HLN |
| Communication connector | DB9 |
| Analog Input | BNC |
| A/D gathering Interface | SMA |
| D/A output Interface | SMB |
| Size(mm) | 195×170×56 |
| Mass(kg) | 1.85 |
CoreMorrow 홈페이지
