E70.D2S/C2K-H Piezo Controller
The E70.D2S/C2K-H piezoelectric controller is a two-channel piezoelectric controller designed based on the standard E70 piezoelectric controller. It can carry out digital communication through serial port, USB.
Features
- 2 Channels
- Ave. current：70mA
- Mass:1.168kg
- Analog/digital signal
Specifications
| Type | E70.C2K-H | E70.D2S-H |
| Functions | Digital and analog piezo controller | |
| Drive | ||
| Channels | 2 | |
| Nominal analog input(V) | -1.67~10 (±10V for constant voltage version) | |
| Nominal output voltage(V) | -20~120(Optional -20~100/150 and one constant voltage) | |
| Input power(W) | 56 | |
| Peak current(A) | 1.1/channel | |
| Ave. current(mA) | 70/channel | |
| Bandwidth(Hz) | 10k/channel | |
| Ripple(mV) | 5/channel(2.2μF) | |
| PZT and sensor connector | ECG.2B.312.CLV | |
| Control input connector | SMB | |
| Servo contro | ||
| Sensor type | - | SGS |
| Servo | - | P.I+Low pass+Notch filter |
| Sensor output connector | EPG.0B.304.HLN | |
| Sensor output voltage(V) | - | 0~10(±10V for constant voltage version) |
| Sensor output ripple(mV) | - | 10 |
| Master control | ||
| Communication | RS-232/422(D-SUB 9), USB(Micro Type-female seat) | |
| Baud rate | 9600, 38400, 57600, 115200 | |
| Settable baud rate for Software secondary development | 9600, 19200, 38400, 57600, 76800, 115200, 128000, 230400, 256000 | |
| PC software control function | Output voltage & displacement, waveform control, setting parameters | |
| PC software waveform control | Programmable/standard waveform output | |
| Secondary development | VC++, Matlab, LabView, DLL dynamic link library functions, etc | |
| Others | ||
| Operating temperature(°C) | 0~50 | |
| Over-current protection | Yes | |
| Static power(W) | 11 | |
| Cooling method | Fan | |
| Size(mm) | 147×170×45.5 | |
| Mass(kg) | 1.168 | |
| Power supply | 24V DC3A | |
| Control way | Analog/digital signal | |
CoreMorrow 홈페이지
