E80.D3S-K Multi-channel Piezo Controller
E80.D3S-K Multi-channel Piezo Controller is a digital controller for driving piezo tip/tilt platform, features 3 outputs, and the third channel is constant voltage output that is suitable for differential drive.
Features
- 3 channel piezo controller
- Analog servo control, digital control
- Power supply 20~30V DC
- Suitable for driving PDM
Specifications
| Type | E80.D3S-K |
| Channels | 3 |
| Nominal analog input(V) | - |
| Nominal output voltage(V) | -20~120V(optional -20~100/150V), one constant voltage output |
| Input power(W) | 56 |
| Peak current(A) | 1/channel |
| Ave. current(mA) | 70/channel |
| Bandwidth(Hz) | 10k/channel |
| Ripple(mV) | 5/channel(2.2μF) |
| PZT connector | J30J-15ZKSP |
| Input connector | J30J-9ZJSP |
| Sensor type | SGS |
| Servo | P.I+low pass |
| Output connector | J30J-9ZJSP |
| Communication | RS-422（J30J-9ZJSP） |
| Baud rate | 9600、38400、57600、115200 |
| Settable baud rate for software secondary development | 9600, 19200, 38400, 57600, 76800, 115200 , 128000, 230400, 256000 |
| Processor | ARM 32 bit |
| D/A converter | 16 bit ±10V |
| A/D converter | 16 bit ±10V |
| PC software control function | Output voltage and displacement, waveform control, setting parameters |
| PC software waveform control | Programmable/standard |
| Secondary development | VC++, Matlab, LabView, DLL dynamic link library functions, etc. |
| Operating temperature(°C) | -40~65 |
| Overcurrent protection | Yes |
| Static power(W) | 11 |
| Cooling | At the bottom of the shell |
| Size(mm) | 150x125x30 |
| Mass(kg) | 0.649 |
| Power supply | 20~30V DC3A |
| Control mode | Digital signal control |
CoreMorrow 홈페이지
