E80.D1S-I Piezo Control Module
The E80.D1S-I piezo control module serves as a specialized power supply for driving piezo actuators, etc..
It features both open-loop and closed-loop servo control capabilities.
This module is controlled by digital signal via RS-422 port.
Features
- 1 output channel
- Board-type
- Software control
- Output voltage: -20~120V
Specifications
| Type | E80.D1S-I |
| Function | Piezo Control Module |
| Control mode | Digital Control |
| Drive | |
| Channels | 1 |
| Nominal output voltage(V) | -20~120 |
| Peak current(mA) | 1000 |
| Ave. current(mA) | 60 |
| Bandwidth(kHz) | 10k |
| Output ripple(mV) | 10（2.2μF） |
| PZT & Sensor connector | ZPG.0B.306.HLN |
| Input power(W) | 7 |
| Servo control | |
| Sensor type | SGS |
| Sensor output connector | SMA |
| Master control | |
| Communication | RS-422 |
| Communication connector | XH2.54-5P |
| Processor | 32bit 168MHz |
| D/A converter | 16bit |
| Others | |
| Operating temperature(°C) | 0~50 |
| Over-current protection | Yes |
| Output short-circuited current (mA) | 60 |
| Static power(W) | 5 |
| Length × depth (mm) | 135×75 |
| Power supply(V) | 24VDC/1.5A（20~30V） |
| Mass(g) | 123 |
CoreMorrow 홈페이지
