E80.A2K-I Piezo Control Module
E80.A2K-I piezo control module is designed specifically for driving high-voltage piezo actuators, such as driving piezo plate actuators.
Its output voltage range can reach up to -500V to +500V, and can be controlled through external analog signals. It has two forms, optional shell or module type.
Features
- 2 voltage output channels
- Analog signal control
- Output voltage -500V to +500V
- Bandwidth to 5kHz
- Optional shell or module type
Specifications
| Type | E80.A2K-I |
| Function | Analog piezo controller |
| Channels | 2 |
| Nominal analog input(V) | -5~+5 |
| Nominal output voltage(V) | -500~+500 |
| Peak current(mA) | 18/channel |
| Ave. current(mA) | 5/channel |
| Bandwidth(-3dB)(Hz) | 2k/channel |
| Operational bandwidth(Hz) | 2.5k@4V 5k@2V |
| Ripple(mVpp) | 100/channel(@100nF) |
| Gain | 100 |
| Control input connector | SMB |
| PZT interface | ZPL.00.250.NTN |
| Operating temperature(°C) | 0~50 |
| Overcurrent protection | YES |
| Output current short-circuit(mA) | 6 |
| Power supply | 24V DC 2.5A |
| Static power(W) | 6 |
| Size（mm3） | Board type: 220×160×40 Packaged type: 245×43.5×165 |
| Mass(kg) | ＜1 |
CoreMorrow 홈페이지
