P79.Z200S86-D P79.Z200K86-D Z Microscope Scanner
P79 series piezoelectric Z microscope scanner is a Z-axis micro-motion platform, mainly used for supporting macro-motion XY-axis micro-scanning stages and piezoelectric motor platforms on the market.
P79 platform can perform fast Z-axis focus adjustments with milliseconds step time.
Features
- Travel to 200μm
- Load capacity to 1.5kg
- Aperture size: 86.5×128.5mm
- High closed-loop repeatability
- Z version
- UHV version available
Applications
- Fluorescence/confocal microscopy
- 3D imaging
- Biotechnology
- Autofocus system
- Sample detection
Specifications
| Type | P79.Z200S86-D P79.Z200K86-D | Units | |
| Active axes | Z | ||
| Drive control | 1 driving channel 1 sensing channel | ||
| Travel range(0~120V) | 160 | μm±20% | |
| Max.travel range(0~150V) | 200 | μm±20% | |
| Sensor | SGS/- | ||
| Aperture | 86.5×128.5 | mm | |
| Resolution | 6/2 | nm | |
| Linearity | 0.15/- | %F.S. | |
| Repeatability | 0.1/- | %F.S. | |
| Picth/yaw/roll | <20 | μrad | |
| Push/pull force | - | N | |
| Stiffness | 0.2 | N/μm±20% | |
| Unloaded resonant frequency | 100 | Hz±20% | |
| Unloaded step time | -/5 | ms±20% | |
| Load capacity | Horizontal | 1.5 | kg |
| Vertical | 0.05 | ||
| Inverted | 0.1 | ||
| El. capacitance | 21.6 | μF±20% | |
| Material | Steel, A | ||
| Mass | about 800 | g±5% | |
Note: Above parameters are measured with the E00/E01 series piezo controller. The maximum driving voltage can be -20V~150V; For high-reliability and long-term use, the recommended driving voltage is 0~120V.
CoreMorrow 홈페이지
