E80.D3S-O Multi-channel Piezo Controller
E80.D3S-O Multi-channel Piezo Controller is for driving piezo tip/tilt platform, features 3 outputs, and the third channel is constant voltage output that is suitable for differential drive. It has two types, packaged type and board type for choice.
Features
- 3 channels
- 20~30V DC power supply
- Digital control
- Suitable for driving piezo steering mirror
Specifications
| Type | E80.D3S-O |
| Function | Digital controller |
| Channels | 3 |
| Analog input(V) | - |
| Output voltage(V) | -20~120(optional -20~100/150), the 3rd channel outputs constant voltage |
| Input power(W) | 56 |
| Peak current(A) | 1/channel |
| Ave.current(mA) | 70/channel |
| Bandwidth(Hz) | 10k/channel |
| Ripple(mV) | 5/channel(2.2μF) |
| PZT connector | J30J-15ZKNP5-J |
| Communication connector | J30JR-9TJNP5-J |
| Sensor type | SGS |
| Servo | P.I+low pass |
| Sensor output connector | J30JR-9TJNP5-J |
| Communication port | RS-422（J30JR-9TJNP5-J） |
| Baud rate | 9600、38400、57600、115200 |
| Settable baud rate for software secondary development | 9600、19200、38400、57600、 76800、115200 、128000、 230400、256000 |
| Processor | ARM 32bit |
| D/A converter | 16bit ±10V |
| A/D converter | 16bit ±10V |
| PC software control function | Output voltage and displacement, waveform control, setting parameters |
| PC software waveform control | Programmable/standard |
| Secondary development | VC++, Matlab, LabView, DLL dynamic link library functions, etc. |
| Operating temperature(°C | -40~65 |
| Overcurrent protection | Yes |
| Static power(W) | 11 |
| Cooling | At the bottom of the shell |
| Size(mm) | 160×110×30 |
| Mass(g) | 495 |
| Power supply | 20~30V DC3A |
| Control mode | Digital signal control |
CoreMorrow 홈페이지
