• 전체보기

DL-ASE - 1200~1700 nm 광대역 ASE 광원 및 드라이버

  • 제품유형 CW Lasers
  • 제품규격 파장 범위: 1200~1700 nm
    중심 파장: 1310~1680 nm
    출력: 8~15 dBm
    동작 방식: CW 또는 직접 강도 변조
    변조 대역폭: 아날로그 20 MHz, 펄스 및 디지털 200 MHz
  • 브랜드 Denselight

Product Details

DenseLight Logo

 

DenseLight DL-ASE Broadband Light Source and Driver 

1200~1700 nm O~U 통신 대역, CW 및 최대 200 MHz 직접 변조형 저편광 ASE 광원 

(DenseLight) 

 

DenseLight DL-ASE Broadband Light Source and Driver


DenseLight DL-ASE는 O, E, S, C, L, U 대역을 포함하는 1200~1700 nm 파장 범위에서 사용할 수 있는 반도체 기반 광대역 ASE 광원 및 드라이버입니다. SLED의 초발광 원리를 이용해 넓은 스펙트럼과 낮은 편광도(DOP)의 출력을 생성하며, 일반 레이저처럼 좁은 선폭이나 높은 코히런스를 갖지 않기 때문에 간섭 노이즈를 줄여야 하는 광통신 부품 시험, 광섬유 센싱, 간섭계 및 광학 계측 시스템에 적합합니다. 표준 모델은 1310, 1450, 1500, 1550, 1580 및 1680 nm 중심 파장과 8~15 dBm 출력으로 구성되며, 가우시안 형태의 대칭적인 출력 스펙트럼을 제공합니다.

 

DL-ASE는 안정적인 연속광을 제공하는 DL-ASE-CW 시리즈와 직접 강도 변조가 가능한 DL-ASE-IM 시리즈로 구분됩니다. CW 시리즈는 출력과 스펙트럼의 장기 안정성이 중요한 광학 부품 평가 및 상시 구동 시스템에 적합하며, SMF 파이버 피그테일 출력과 Active-Low 방식의 원격 광출력 제어를 지원합니다. IM 시리즈는 프리바이어스 광출력을 기반으로 최대 20 MHz의 아날로그 강도 변조와 최대 200 MHz의 펄스 또는 디지털 변조를 지원하므로 시간 응답 측정, 동적 광학 시험 및 변조 광원을 이용하는 센싱 시스템에 활용할 수 있으며, 광출력은 FC 리셉터클 방식으로 제공됩니다.

 

두 시리즈 모두 내장형 광 아이솔레이터를 통해 외부 반사광에 대한 안정성과 신뢰성을 높였으며, 과열 보호와 내부 PCB 온도 모니터링 기능을 갖추고 있습니다. 표준 동작 온도는 0~65°C이고 요청 시 -20~70°C까지 확장할 수 있으며, 반사 감지 신호 포트나 모니터링용 광 커플러를 추가하는 등 필요한 스펙트럼과 인터페이스에 맞춘 주문형 구성이 가능합니다. Telcordia 인증과 RoHS 요구사항을 충족해 연구용 장비뿐 아니라 통신 및 산업용 시스템에도 통합할 수 있습니다.


 

특징 
 

■ 1200–1700 nm의 넓은 스펙트럼 범위를 지원하는 광대역 ASE 광원
■ 적용 분야에 맞춘 ASE 설계와 맞춤형 스펙트럼 조합 지원
■ Return Sensing Signal Port 및 모니터링용 Optical Coupler 등 커스텀 구성 가능
■ CW 방식의 DL-ASE-CW-Series와 직접 변조 방식의 DL-ASE-IM-Series 제공
■ Fiber Pigtail 또는 FC Receptacle 출력 방식 선택 가능
■ 광 아이솔레이터를 내장해 반사광에 대한 신뢰성과 출력 안정성 향상
■ Active-Low Logic을 이용한 원격 광출력 활성화 기능 지원
■ 표준 0°C–65°C 및 확장형 −20°C–70°C 작동 온도 범위
■ Telcordia 인증 및 RoHS 규격 준수

 

 

주요 어플리케이션

 

  • ■ Structural Health Monitoring (SHM) – Sensing in gas & oil
  • ■ Test & Measurement
  • ■ Communications
    Affordable gigabit bandwidth fiber-link to homes and business (FTTX), test & measurement for telecom networks
  • ■ Medical applications
    OCT (biopsies-less medical cell imaging, diagnostic imaging), point of use/ handhelds/ non-invasive diagnosis (blood analysis)
  • ■ Energy, oil and gas
    Sensing in gas & oil production, telemetry in electricity distribution
  • ■ Industrial controls
    In-line production process monitoring, 3D metrology and surface metrology, semiconductor fabrication (solar cells), chemical and gas sensing – safety, emission control, security
  • ■ Environmental sensing
    Physical (temp, pressure, strain, vibrations), structural and civil engineering, smart structures, intelligent distributed sensing
  • ■ Defense & security
    Perimeter defense, navigation and guidance – inertia sensing (gyroscope), infrared illumination for surveillance and speckle-free military imaging
  •  


제품 사양 

 

Model

DL-ASE-CW-CSO083A

DL-ASE-CW-CSE145A

DL-ASE-CW-CSS145A

Band

O

E

S

Center Wavelength

1310 nm

1450 nm

1500 nm

Power

8 dBm

14 dBm

13.5 dBm

Power Density

 

-7.5 dBm/nm

-10 dBm/nm

Operation Mode

CW

CW

CW

Spectral Symmetry 

(Gaussian)

Yes

Yes

Yes

Datasheet

Model

DL-ASE-CW-CSC117A

DL-ASE-CW-CSC107A

DL-ASE-CW-CS5169A

DL-ASE-IM-CSC107A

Band

C

C

C

C

Center Wavelength

1550 nm

1550 nm

1550 nm

1580 nm

Power

11 dBm

10 dBm

9 dBm

10 dBm

Power Density

-10 dBm/nm

-11 dBm/nm

-25 dBm/0.1nm

-16 dBm/nm

Operation Mode

CW

IM

CW

IM

Spectral Symmetry 

(Gaussian)

Yes

Yes

Yes

Yes

Datasheet

Model

DL-ASE-CW-CSCL117A

DL-ASE-CW-CSL155A

DL-ASE-CW-CSU135A

Band

L

L

U

Center Wavelength

1580 nm

1580 nm

1680 nm

Power

11 dBm

15 dBm

13 dBm

Power Density

-15 dBm/nm

-10 dBm/nm

-11 dBm/nm

Operation Mode

CW

CW

CW

Spectral Symmetry 

(Gaussian)

Yes

Yes

Yes

Datasheet

  

  • DL-ASE-IM Series
  • - Over temperature protection and internal PCB temperature monitor
  • - Pre-bias optical power
  • - Analog intensity modulation up to 20MHz
  • - Pulse or digital modulation up to 200MHz
  • Optical Output – FC Receptacle

DL-ASE-CW Series

  • - Over temperature protection and internal PCB  temperature monitor
  • - Active-Low optical power enabled function
  • - Extendable Operating temperature up to 70 °C
  • - Optical Output – SMF Fiber Pigtail Output


 

 추가로 문의하실 사항이 있으시면 당사 홈페이지의 견적요청 또는 문의사항 메뉴를 이용해 주시거나, 전화 또는 이메일로 연락 주시기 바랍니다.